35 個最佳材料科學插圖 AI 提示詞

材料科學出版物需要精確的晶體結構、機械性能、表徵技術和加工方法的視覺化。本指南介紹了 35 個來自真實材料研究的經過驗證的 AI 提示詞，幫助您為期刊和簡報建立符合發表標準的圖表。

在本指南中，您將找到：

結構工程與建築材料提示詞
表面表徵與潤濕性插圖
奈米材料合成與加工圖表
機械測試與失效分析視覺化

1. 結構工程材料

1.1 抗震設計系統

提示詞：結構牆系統（EC8 標準）

Technical infographic on buildings with structural wall systems according to
EC8-1/2004 updated to 2026. Illustrate the following:
- Reinforced concrete shear wall configuration
- Lateral load distribution paths
- Ductility class requirements (DCM, DCH)
- Connection details at wall-slab interfaces
- Seismic force reduction factors
Use a professional engineering diagram style with section views.

結構牆系統

提示詞：雙重結構系統

Technical infographic on buildings with dual systems according to EC8-1/2004.
Illustrate the combination of structural walls and moment-resisting frames:
- Wall contribution to lateral resistance (>50%)
- Frame contribution to lateral resistance
- Interaction between systems
- Load path diagrams
- Typical floor plan layouts
Include Eurocode compliance annotations.

雙重系統

1.2 先進建築系統

提示詞：無梁板與剪力牆組合

Technical infographic detailing building designs incorporating flat slab systems,
shear walls, and moment-resisting frames. Show:
- Flat slab punching shear reinforcement details
- Shear wall placement optimization
- Column-slab connection behavior
- Progressive collapse resistance measures
- Construction sequence considerations
Use WinUI3 style clean graphics with annotation callouts.

無梁板系統

2. 表面科學與表徵

2.1 接觸角測量

提示詞：玻璃基板上的液滴形成

Illustrate the formation of a liquid droplet on a glass substrate, explaining
the principles of contact angle measurement:
- Young's equation diagram with force vectors
- Sessile drop geometry
- Advancing and receding contact angles
- Hysteresis visualization
- Measurement technique (goniometer setup)
Include mathematical notation for surface energies.

接觸角

提示詞：有機薄膜潤濕性

Draw a figure illustrating a droplet on a glass substrate containing an organic
film. The droplet is used to measure the contact angle to assess the organic
film's surface properties. Show:
- Substrate layered structure (glass + organic coating)
- Water droplet with contact angle marked
- Surface energy components (polar, dispersive)
- Comparison of hydrophilic vs hydrophobic surfaces

有機薄膜潤濕性

3. 奈米材料與先進加工

3.1 氣凝膠合成

提示詞：氣凝膠乾燥方法的歷史發展

Historical Development of Aerogel Drying Methods

Create a timeline-style infographic showing:
- Early Exploration and the Introduction of Supercritical Drying (1930s)
- Development of ambient pressure drying techniques
- Freeze drying innovations
- Modern hybrid approaches
- Key researchers and breakthroughs at each stage
Include process diagrams for each drying method.

氣凝膠乾燥方法

3.2 多圖板科學插圖

提示詞：SCI 期刊多圖板插圖

This is a multi-panel scientific illustration suitable for an SCI journal,
presented in a clean 3D modeling style. Create:
- Panel A: Material synthesis schematic
- Panel B: Characterization results (XRD, SEM)
- Panel C: Performance testing setup
- Panel D: Comparison with benchmarks
Use consistent color scheme, clear panel labels (A, B, C, D), and
professional scientific illustration quality.

多圖板插圖

4. 機械測試與分析

4.1 纖維增強複合材料

提示詞：混合纖維混凝土延性研究

I have conducted an analytical study using a MATLAB program to investigate
the ductility and failure patterns of a hybrid fiber reinforced concrete beam.
Create a figure showing:
- Beam cross-section with fiber distribution
- Load-deflection curve with key points labeled
- Crack pattern progression at different load levels
- Ductility index calculation visualization
- Comparison between hybrid and mono-fiber systems

混合纖維混凝土

5. 材料科學圖表最佳實踐

各類圖表的關鍵要素

圖表類型	必備組件
結構工程	載重路徑、配筋細節、規範引用、尺寸
表面表徵	比例尺、測量幾何形狀、表面能符號
奈米材料	粒徑分佈、合成條件、TEM/SEM 比例
機械測試	試片幾何形狀、加載條件、失效模式