Illustration
Visualization
Convert Image
Pricing
Blog

SciDraw

AI-powered scientific illustration platform for researchers and PhD students. Create publication-ready TOC graphics, journal covers, conference posters, and research figures in minutes. No design skills required.

Email Stripe Climate

Stripe Climate Contribution

Product

Features
Pricing
Gallery

Blog

Product
Tutorials
Changelog

Legal

Cookie Policy
Privacy Policy
Terms of Service

© 2026 SciDraw All Rights Reserved.

TiN powder was added to a mixed solution of water and eth... | SciDraw Gallery

Back to Gallery

TiN powder was added to a mixed solution of water and ethanol and ultrasonically dispersed for 30 min.

Materials Science

Prompt Description

TiN powder was added to a mixed solution of water and ethanol and ultrasonically dispersed for 30 min.

Related Illustrations

Schematic diagram of a high-temperature furnace.

Schematic diagram of a high-temperature furnace....

Generate a flowchart illustrating the experimental procedure. Add 2.3 mL of TiCl4 to 10 mL of ethanol solution and stir the solution for 2 h. During the stirring process, add 16.8 g of urea to obtain a homogeneous precursor solution. Pyrolyze the precursor in a tube furnace under N2 atmosphere to prepare TiN porous ceramics. The sintering temperature is set to 800℃, the heating rate is 10 K/min, and the holding time is 5 h.

Generate a flowchart illustrating the experimental procedure...

Draw a flowchart of the experimental procedure: Add 2.3 mL of TiCl4 to 10 mL of ethanol solution and stir the solution for 2 h. During this period, add 16.8 g of urea to obtain a homogeneous precursor solution. Pyrolyze the precursor in a tube furnace under N2 atmosphere to prepare TiN porous ceramics. The sintering temperature is set to 800℃, the heating rate is 10 K/min, and the holding time is 5 h.

Draw a flowchart of the experimental procedure: Add 2.3 mL o...

A schematic diagram illustrates the laser polishing and laser carbonitriding process equipment, including a laser and laser head. Carbonitriding is achieved by introducing a mixed gas into a gas atmosphere chamber or by applying powder to the surface of the component. The component is fixed on a worktable, and the laser beam acts on the surface of the component.

A schematic diagram illustrates the laser polishing and lase...